Connector selection in the configurator with FEP stranded cable

Flat receptacles are available in various designs, lengths and widths. The common sizes are 4.8 mm and 6.3 mm. The color of the insulation gives an indication of the processable cable cross section.

We can supply you with flat receptacles ready assembled with matching wire / cable in the following cross sections:

The flat plug is suitable for safe contacting even under movement, e.g. in cars. The latch prevents unintentional disconnection of the blade terminal. The tabs are available in different versions, lengths and widths. The common sizes are 4.8 mm and 6.35 mm.

We can supply you with flat plugs ready assembled with the appropriate wire / cable in the following cross-sections:

Forked cable lugs are available for different bolt or screw diameters and for different cable cross sections. The crimping cable lugs in fork form are available in uninsulated and insulated versions. The color of the insulation indicates the coding of the conductor cross section.

We can supply forked cable lugs ready assembled with matching wire / cable in the following cross sections:

Ring cable lugs (also called crimp cable lug ring shape) are used e.g. for grounding cables. Ring cable lugs enable a clamp contact on electrically conductive components, especially by gripping a screw which is connected to an electrically conductive component and contacts the cable lug or lugs by screwing them in.

We can supply you with the ring cable ready assembled with the appropriate cable in the following cross-sections:

We can provide you with partial removal of the insulation on one or both sides, also serves as protection for transport for later processing.

Available ready assembled with matching wire / cable in the following cross sections: (Length of the insulation stripping)

We tin the ends with ROHS2 compliant solder and processing. This is optimal for later processing for soldering to a printed circuit board or to connectors.

Available ready assembled with matching wire / cable in the following cross sections: (Length of the stripping)

Tubular cable lugs are available with different dimensions and different flange holes for bolts. The sizes of holes range from M3 to M20. Possible cable cross-sections range from 0.75 mm² to 120 mm², depending on the tubular cable lug used.

Tubular cable lugs with additional shrink tubing are available on request.

We can supply you with tubular cable lugs ready assembled with suitable wire / cable in the following cross-sections:

Turned crimp contact with 1.6mm suitable for Han D® series from HARTING Available with socket contacts / pin contacts Design: silver plated

We can supply you with turned crimp contacts ready assembled with matching cable in the following cross-sections:

Angled flat receptacles (like flat receptacles only unwound) are available in different versions, lengths and widths. The common sizes are 4.8 mm and 6.35 mm.

We can supply you with angled flat blade receptacles ready assembled with the appropriate wire / cable in the following cross-sections:

Flat receptacle with latching nose is suitable for safe contacting even under movement, e.g. in cars. The latch prevents unintentional disconnection of the flat plug. The tab receptacle is available in different versions, lengths and widths. The common sizes are 4.8 mm and 6.35 mm.

We can supply you with the flat plug receptacle completely assembled with the appropriate wire / cable in the following cross-sections:

Flat receptacle with branch is suitable for connecting two participants to one flat plug. The flat receptacle with branch is available in different versions, lengths and widths. The common sizes are 4.8 mm and 6.35 mm.

We can supply you with flat receptacle with branch ready assembled with matching wire / cable in the following cross-sections: